Resources

You are here: Resources

Publications

Kurth, Balzan Presented at the Preconcentration Digital Conference November 2020 ABSTRACT The potential for bulk diversion was identified and quickly implemented following the development of bulk sensing technologies applied to conveyed flows. In the early 1980s real time analysis of ash in coal...
13-Apr-2021
Blouin, Gagnon, El-Haddad, Soares de Lima Filho, Vanier, Harhira, Bouchard, Boismenu, Hamel, Beauchesne, Padioleau, Vaillancourt, Plugatyr, Sabsabi, Wilkie Presented at the Preconcentration Digital Conference November 2020 ABSTRACT Quantitative mineralogy is an established discipline in the geosc...
13-Apr-2021
Auranen, Raatikainen Presented at the Preconcentration Digital Conference November 2020 ABSTRACT ON-LINE SENSORS IN PRE-CONCENTRATION – 25 YEARS OF EXPERIENCE IMA Engineering (IMA) and Mine On-Line Service (MOLS) companies have used on-line sensors for analysing ore and waste rock in mining for...
13-Apr-2021
Coghill, Cutmore, Carter, Millen, Haarlem Presented at the Preconcentration Digital Conference November 2020 ABSTRACT Due to the low concentration of gold, ore sorting for gold has always required measuring indirect properties, such as density or colour, to allow separation on a rock by rock basi...
13-Apr-2021
Rech, Kroukamp Presented at the Preconcentration Digital Conference November 2020 ABSTRACT CRONIMET Australia in cooperation with Speciality Metals International, the mining lease holder of the Mt Carbine Tungsten mine, have demonstrated the preconcentration and processing of large (>12 millio...
13-Apr-2021
BoBo, La Rosa, Cameron Presented at the Preconcentration Digital Conference November 2020 ABSTRACT Efficient pre-concentration using natural and induced deportment starts with effective blast design. Leveraging these characteristics using Size-Based Grade Engineering® techniques requires detailed...
13-Apr-2021
Assimi, Koch, Garcia, Wagner, Neumann Presented at the Preconcentration Digital Conference November 2020 ABSTRACT Run-of-Mine (ROM) stockpiles are the inventory of valuable materials extracted from the mine. Depending on the customer requests, a selective addition of ore from stockyards should be...
12-Apr-2021
Pyle, Ballantyne, Chandramohan, Vizcarra, Lane Presented at the Preconcentration Digital Conference November 2020 ABSTRACT Preconcentration, through gravity separation (Wallace et al, 2015), magnetic separation and particle size (Clout, 2013), has been used in many historical projects to convert...
30-Mar-2021
Jenkin, Revell Presented at the Preconcentration Digital Conference November 2020 ABSTRACT This paper presents an analysis of significant Australian-based R&D programs focussed on the minerals industry, which was commissioned by CRC ORE. The landscape analysis may assist organisations with R&...
30-Mar-2021
Anyimadu, Appeah Owusu, Peattie, Chamberlain, Aniawu – Asumakah Presented at the Preconcentration Digital Conference November 2020 ABSTRACT This is an integrated geology and plant improvement study arising from the heterogeneity seen in mineralogy and gold association at the Obuasi goldmine in Gh...
30-Mar-2021
*K. Bru, M. Beaulieu, R. Sousa, M. Leite, A, De Sousa, E. Kol, J. Rozenkranz, D. de Parvaz Minerals Engineering ABSTRACT Electric Pulse Fragmentation (EPF) is an innovative technology that uses High-Voltage Pulsed Power (HVPP) for the selective comminution of a material. This paper aims to compa...
23-Jun-2020
Bearman, Bowman, Dunne AusIMM Publication ABSTRACT Upgrading coarse feed in gold plants, through a process of selective processing, has always been of interest. The level of interest has waxed and waned over the last 30–40 years, but improvements in methods and pressure to increase the efficienc...
23-Jun-2020
*P. Shelley, I. Molina, D. Patsikatheodorou Presented at Procemin GEOMET 2019 ABSTRACT The paper shows how measurements from inside an operating SAG mill are now a reality. The paper discusses how the measurements might affect and enhance energy efficient mill optimisation. Energy efficient comm...
23-Jun-2020
*K. Tungpalan, A. Nguyen, C. Evans, E. Manlapig, K. Nguyen Presented at Procemin GEOMET 2019 ABSTRACT Ore texture represents the fundamental ore properties that significantly influence processing behaviour. However, the current measurement to obtain detailed textural information is through the Q...
23-Jun-2020
*P. Lind, K. Erwin, R. Chandramohan, D. Tweed, G. Lane, P. Staples, S. Hille, B. Foggiatto, J. Awmack, B. Patterson Presented at SAG Conference Vancouver, Canada September 22 – 26, 2019 ABSTRACT Newmont Goldcorp’s Peñasquito operation, located in the state of Zacatecas in northwest Mexico, is cur...
23-Jun-2020
M. Sherman, A. Collins Presented at World Gold 2019 ABSTRACT The ever changing demands of providing operating teams with grinding circuits that meet their needs has resulted in equipment suppliers offering a broader range of grinding equipment and researchers investigating more efficient methods...
23-Jun-2020
T.Vizcarra, B. Wong Presented at SAG Conference Vancouver, Canada September 22 – 26, 2019 ABSTRACT JKTech has completed a comparative testing program of Bond tests as an addition to its “round-robin” quality control program for JK Drop Weight (JKDW) and SMC tests. Over seventy Bond tests of repr...
22-Jun-2020
Larson Presented at the SAG Conference Vancouver, Canada September 22 – 26, 2019 Abstract While stirred mills in regrind and fine grinding duties have become more accepted, there continue to be questions about the testwork used for scaleup and comparisons. One reliable reality check for any futur...
01-Jun-2020
M. Bueno, B. Foggiatto, G. Lane SAG Conference Vancouver, Canada September 22 – 26, 2019 ABSTRACT This paper presents an assessment and trade-off study of high-pressure grinding rolls (HPGR)-based vs. autogenous grinding (AG)-based milling options for a 65 kt/d copper/gold project. The study rel...
05-May-2020
B Putland & R Sciberras SAG Conference Vancouver, Canada September 22 – 26, 2019 ABSTRACT Many ore bodies are getting harder, more abrasive, and lower in grade. One of the issues designers face is minimizing capital and operating costs when treating such ores. Designers often look to secondar...
06-Jan-2020