Comminution Circuit Design Considerations
G Lane (1), B Foggiatto (1), R Braun (1), M P Bueno (1), P Staples (2) and S Rivard (2)
49th Annual Canadian Minerals Processors Conference, Ottawa, Canada, 17-19 January 2017
ABSTRACT
This paper demonstrates the selection of grinding circui...
26-May-2017
Optimisation of installed mill power post-installation of secondary crushing circuit at Northparkes Mines.
Y Sulianto, T Trott, D Morgan, T Bell, F Kock and B G Putland
AusIMM Mill Operators Conference 2016
ABSTRACT
Northparkes installed and commissioned a secondary crushing circui...
26-Apr-2017
The transition from semi-autogenous to autogenous milling at Waihi Gold
C Haines and D Bertoldi
AusIMM Mill Operators Conference 2016
ABSTRACT
The Waihi Gold Mine (WGM) operated by OceanaGold New Zealand Limited is a wholly owned subsidiary of the OceanaGold Corporation of Australi...
26-Apr-2017
Grinding circuit practices at Newmont
A Giblett and S Hart
AusIMM Mill Operators Conference 2016
ABSTRACT
In 2015 operations under the ownership and/or management of all Newmont Mining Corporation subsidiaries (Newmont) produced 5.7 Moz of gold and 619 Mlb of copper from mining opera...
26-Apr-2017
Upgrading low-grade gold ore stockpiles by preconcentration using ore sorting – an assessment of the economic impact and viability.
A N Parry and G van Wyk
Mill Operators Conference 2016
ABSTRACT
Sensor based automatic ore sorting technologies are used in the minerals industries to efficiently...
26-Apr-2017
Design, installation, commissioning and operation of fine grinding technology at the Kevitsa Mine
B Nielsen, H Lehto & B Musuku
AusIMM Mill Operators Conference 2016
ABSTRACT
The demand for fine and ultra-fine grinding associated with the processing of more challenging, finer gra...
26-Apr-2017
G Harbort and D Zoetbrood
ABSTRACT
The Phu Kham copper-gold operation in the Laos People’s Democratic Republic (PDR) is owned and operated by Phu Bia Mining Limited. PanAust Limited holds a 90 per cent interest in Phu Bia Mining Limited, with the remaining ten per cent held by the Laos PDR Gov...
15-Feb-2017
ABSTRACT
Simulation work was carried out to analyse how feeding a finer size distribution to a single stage SAG mill in closed circuit with hydro cyclones at Freda Rebecca Gold Mine would affect throughput and specific energy consumption using an Excel based milling process simulator developed by...
07-May-2016
Abstract
The Dumont deposit is a large (1,179 Mt proven and probable reserve) low grade (0.27% nickel) nickel sulphide project located in the Abitibi region 25 km west of Amos, Quebec. Royal Nickel Corporation acquired the project in 2007 and has since taken the project from a scoping study in 20...
08-Apr-2016
Abstract
Stirred mill technology dates back to 1928 where the idea to use "an agitator and spherical grinding media" was presented. In the context of the mining industry, interest in stirred milling technologies has grown over the last 20 years where the typical observation reported in the literatu...
20-Mar-2016
ABSTRACT
In 2012, a single module heavy medium cyclone plant (HMP) was installed at the Glencore Zinc’s (then Xstrata Zinc) McArthur River lead zinc mine. The HMP formed the first part of the MRM Phase 3 Project to increase run of mine (ROM) capacity from 2.4 to 5.5 Mt/a.
The purpose of the HMP...
17-Feb-2016
SAG 2015
A simple strategy is required for assessing the efficiency with which comminution circuits apply energy to achieve size reduction. A coherent methodology has been developed, based on well established theories, to graphically identify the opportunities for process improvement and the pote...
03-Jan-2016
ABSTRACT
The Kansanshi copper ore body consists of distinct sulphide and oxide zones as well as a variable transitional zone containing both oxide and sulphide minerals which is referred to as the mixed ore zone. All three ores exist in exploitable quantities for the life of mine. The impact and...
02-Dec-2015
ABSTRACT
PT Newmont Nusa Tenggara – Batu Hijau site mine to mill program has been systematically improved and resulting in Geo-Metallurgical detailed ore characteristics is successfully being used for short and long term business planning and mill throughput predictions. Actual plant operating an...
30-Nov-2015
ABSTRACT
The inherent conservatism of the mining industry is well understood, but the current hurdles encountered with financing new projects have complicated instances when new technologies such as high pressure grinding rolls (HPGR) are considered, especially if it translates into higher capita...
25-Nov-2015
ABSTRACT
At the regrind or secondary grinding stages of base metal ores, the concern about energy efficiency is usually extremely important. In general, the specific energy consumption at this stage is higher than during the primary grinding stages. In addition, a tendency of finer grinding has bee...
21-Jul-2015
International Journal of Mineral Processing 2004
Despite reservations of a number of researchers concerning the applicability of Bond's equation for relating specific energy to the size reduction of rocks, his approach has become an industry standard.
Data from a large number of pilot and full-s...
29-Mar-2005
Metallurgical Plant Design and Operating Strategies 2004
Oceana Gold (New Zealand) Limited operates the Macraes Gold Mine near Dunedin on the South Island of New Zealand. The ore body is mineralogically complex and comparatively low grade requiring a series of unit processes and resulting in a re...
22-Oct-2004
Comminution 1998
This paper presents observations made during the conduct and analysis of eleven separate autogenous and semi-autogenous pilot plant trials. These trials were conducted using different ores for various projects over the past five years. The ores tested include relatively competent...
22-Nov-1998