Significance of Exposed Grain Surface Area in Coarse Particle Flotation of Low-Grade Gold Ore with the Hydrofloat ™ Technology
J D Miller (1), C L Lin (1), Y Wang (1), M Mankosa (2), J Kohmuench (2) and G Luttrell (3)
IMPC 2016: XXVIII International Mineral Processing Congress Proceedings, September 11-15, Quebec City, Canada
ABSTRACT
Conventional flotation machines are typically limited to a particle topsize of 150-200 microns due to inherent constraints created by the pulp and froth phases. To overcome these limitations, a novel fluidized-bed flotation system called the HydroFloat ™ Separator has been developed specifically for the purpose of floating coarse particles containing only small amounts of exposed hydrophobic minerals. Over the last decade, this technology has been successfully applied to industrial minerals with several full-scale units installed to recover particles up to and exceeding 3,000 microns diameter. More recently, sulphide-based test work has shown that this novel device is also capable of recovering metalliferous values at a grind size that is much coarser than currently used in industrial concentrators. In the current study, high resolution X-ray microtomography (HRXMT) was used to experimentally compare the degree of exposed grain surface area necessary to recover coarse particles using the HydroFloat ™ technology to that attainable using a traditional mechanical flotation cell. The data indicate that exposed grain surface area is a critical factor for coarse particle flotation. For the gold-bearing sulphide ore examined in this study, the HRXMT data suggest that near complete recoveries of coarse (850x500 nanometre) multiphase particles containing as little as 1% exposed grain surface area were realistically attainable using the HydroFloat ™ technology. As such, this new technology may offer a unique opportunity for increasing concentrator capacity by increasing the primary grind size needed for rougher/scavenger separations.
(1) Department of Metallurgical Engineering, College of Mines and Earth Sciences, University of Utah, Salt Lake City, Utah 84112 USA
(2) Eriez Flotation Division, 2200 Asbury Road, Erie, Pennsylvania 16506 USA
(3) Mining and Minerals Engineering, 100 Holden Hall, Virginia Tech, Blacksburg, Virginia 24061 USA
CITATION:
D Miller J D, Lin C L, Wang Y, Mankosa M, Kohmuench J and Luttrell G. Significance of Exposed Grain Surface Area in Coarse Particle Flotation of Low-Grade Gold Ore with the Hydrofloat ™ Technology, in IMPC 2016: XXVIII International Mineral Processing Congress Proceedings, September 11-15, Quebec City, Canada, 2016, Published by the Canadian Institute of Mining, Metallurgy and Petroleum (CIM).
CEEC thanks the International Mineral Processing Congress (IMPC). Copyright for all papers presented at a Congress are held by the author(s) and hence may be submitted for publication after the Congress to any Journal of their choice.
Please contact the principal author for details of the paper: